What Are The Buttons On A Wireless Headset

Below is result for What Are The Buttons On A Wireless Headset in PDF format. You can download or read online all document for free, but please respect copyrighted ebooks. This site does not host PDF files, all document are the property of their respective owners.

EOS HD Headset Quick Start Guide

Blue button on AIO headset or red button behind belt clip on belt-pac Place battery in battery charger Install fully charged battery in headset or belt-pac Check Headset or Belt-Pac Status With power off: Press A2 + + Power Release buttons Voice prompt in headset will announce current operating mode Change Voice Prompt

Wireless Headset System

the headset, then pressing and holding the Call and Mute buttons simultaneously until the LED turns off. Then put on your headset and turn it on. Disable sensors You can disable your headset smart sensors through Plantronics Hub software under the Settings. menu or in an idle state (not on a call or streaming music).

HyperX Cloud MIX Wired Gaming Headset Manual

1. Connect the detachable microphone to the headset s microphone port. Push until the microphone sits flush. 2. Connect the 3.5mm cable plug with the grey portion into the headset s cable port.

User Guide Multi Device Wireless Headset System

Headset Power 15 Headset Battery Level 16 Mute your Headset During a Call 16 Adjust Your Headset Volume 16 Turn On/Off Headset LED 17 Out of Range Warning Tones 17 Base Features 18 Base Buttons 18 Base Subscription Button 18 Set the Range 19 Bluetooth Pairing Button 19 Daily Use 21 Incoming Calls 21 Outgoing Calls 21 Multi-Phone Status 23

User Guide - Plantronics

To pair your headset and USB adapter again if it loses connection, put your headset and USB adapter into pair mode (for the USB adapter, press the Bluetooth pairing button for 4 seconds until the lights flash red and blue).

Savi W710/W720 - HeadsetPlus.com

NOTE If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. In this configuration, you must press both the headset button on your phone and the call control button on the headset to answer or end calls. B Desk phone + HL10 lifter (sold separately)

Wireless headset / Casque-micro sans fil / Auriculares

Stereo Headset Audio Extension is a system setting that controls the type of audio output to the wireless headset. It is available only when the wireless adaptor is inserted. With the wireless headset you can listen to audio from the PS4™ system including music, videos, and games in Virtual Surround Sound.

FHW50X and UHW50X headsets DECT7, Bluetooth, and - Sonetics

The Headset interfaces with any two-way portable radio using the wired AUX input or wireless DECT connection. When there is a wireless DECT connection, the PTT signal is passed to the wireless DECT7 Wireless Base Station and onto the Digital Intercom. Otherwise, the PTT signal is passed to the wired AUX input.

Brookstone Wireless TV Headphones User Manual

fast while pairing. When a beep is heard, release the buttons. The pairing is finalized when a long beep is heard. Now connect the TRANSMITTER to an audio source and play an audio track. Both the CONNECT button on the TRANSMITTER and the POWER button on the HEADPHONES will illuminate solid.

Platinum Wireless Headset - PlayStation

headset and not on the PlayStation®4 system or other devices. G VOLUME +/- buttons Adjusts the volume of the headset. H USB port Connect to a supported USB device to charge your headset. I Audio input jack When you connect a standard 3.5 mm audio cable to your headset for use with mobile devices, the wireless function is turned off.

User Guide - comfortel.com

With a full charge, the headset provides up to 4.5 hours of continual talk time in wideband mode and up to 6.5 hours in narrowband mode. To determine your headset battery status: Hover over the Plantronics Hub system tray icon Press the base subscription button; the base Audio buttons light up (solid green is high battery,

User Guide Multi Device Wireless Headset System

NOTE If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. In this configuration, you must press both the headset button on your phone and the call control button on the headset to answer or end calls. B Desk phone + HL10 lifter (sold separately)

Alienware Wireless Gaming Headset AW988 User's Guide

The headset speakers and the microphone on the cable will function even when the headset is powered off, as long as the headset is connected to a 3.5 mm audio port. The buttons and LEDs will not function when powered off. NOTE: Audio preset is not supported for 3.5 mm audio port. Microphone Mic on Mic off

ShoreTel IP Phone 480/480g User Guide

headset, speaker, and ring volume. Headset, Mute, and Speaker buttons are illuminated when functions are active. Programmable call appearance buttons Eight custom buttons with tri-color LED indicators show active, incoming, and on-hold calls. They can also be configured as monitored extensions, speed dial keys, or other functions. Function Keys

LOGITECH ZONE WIRELESS

5 Headset can be used with receiver and Bluetooth® paired while charging Charging via Qi wireless charger 1 Fold headset with the wireless charging icon on the earcup to the outside 2 Place earcup with wireless charging icon on top of any Qi wireless charging base * 3 Indicator light will be a breathing, white light when charging

Jabra Evolve 65

When the headset is powered on, but not being used, it will automatically enter sleep mode after 15 minutes to conserve battery. To manually exit sleep mode, press any button on the headset. After 24 hours of sleep mode, the headset will power down completely. To power the headset back on, slide the On/off/connect switch from

Plantronics Voyager 5200 Wireless Bluetooth Headset User

2. With the headset powered on, lay the headset on the back of phone near the NFC tag on phone as shown until NFC pairing completes. If necessary, accept the connection. Pair another device 1. With the headset powered on press and hold the Call button until you hear Pairing. 2.

Wireless Headset System - Plantronics

E Launch the Amazon Alexa app and follow the instructions to set up your headset. 2. Use Alexa. A To use Alexa, tap the Mute button and ask a question. You hear a tone when Alexa is activated. Tap the Call button. Smart sensors in this headset recognize if the headset is being worn and can automatically perform time-saving functions. Interact

Dragon Bluetooth Wireless Headset User Guide

To ensure your PC uses your headset as the default device for both playback and recording, make sure it is properly configured. 1. On your PC, launch the Control Panel and select Sound. 2. In the Sound dialog, make sure the Dragon Bluetooth Wireless Headset ( Dragon BT

Savi 440 - Headset.com

The headset can be rotated for wearing on the left or right ear. 1 Hold the headband so it is aligned to receive the headset as shown and insert the headset into the headband. 2 Rotate the headset up. 3 To optimize the position of the headset, push the headset in so the microphone is close to your mouth.

User Guide Wireless Headset System

the headset, then pressing and holding the Call and Mute buttons simultaneously until the LED turns off. Then put on your headset and turn it on. Disable sensors You can disable your headset smart sensors through Plantronics Hub software under the Settings menu or in an idle state (not on a call or streaming music).

PX5 Wireless Headphones - Bowers & Wilkins

The following buttons on the right earpiece are used for phone call functionality: Function Action Answer or end call Press the Multi-function button once. Answer an incoming call When incoming call occurs, press the Multi-function button once. Decline an incoming call When incoming call occurs, hold the Multi-function for 2 seconds. Switch between

USER S MANUAL - PowerLocus

9- Headset jack 10- Microphone 11- 3.5 stereo sound supply extension line (3ft, male to male) 12- Micro-B USB charging cable (2) Powering the headset Power On: Press the mult-ifunction button for 2-3 seconds until the blue indicator light flashes (the headset says: The blue-tooth is ready to pair ).

Savi W740 Wireless Headset System - Manuals+

8-1 While wearing your headset, press the call control button on headset. 8-2 Remove the handset from desk phone cradle. 8-3 Dial the number using your desk phone. 8-4 You can fine tune the listening volume on the headset. When wearing the headset on your right ear, push the volume button up to increase the volume and

User Guide Wireless Headset System

Press the Volume buttons up (+) or down ( ) during a call or while streaming audio. While not on a call or streaming audio you can press the Volume buttons to adjust the volume level for Caller Announce and other voice prompts. Smart sensors in this headset recognize if the headset is being worn and can automatically perform time-saving

Wireless headset 無線耳機組 R SOUND/CHAT buttons SOUND/CHAT

Wireless headset Headset: CUHYA-0080 Wireless Adaptor: CUHYA-0081 Instruction Manual 耳機組支援 Part names and functions Front Microphone (integrated) Avoid leaving the headphones near speakers while the microphone is on, because this may produce feedback (audio noise). Headband SOUND/CHAT buttons Adjust the chat voice volume in relation

3M Wireless System X-T1 Quick Reference Guide

Each headset has a unique identification number. The number is imprinted on the headset and broadcast to the base station whenever it is turned on. Note: A single headset should not be registered to more than one base station at any given site, whether or not the bases are interconnected. Remove the headset from the existing base station

Jabra PRO™ 9450 - Wireless Headsets and Headphones for

2.2 DOCK HEADSET Dock the headset, as illustrated. When the headset is docked correctly the headset battery will begin charging, if needed. Keep the headset docked while connecting the Jabra PRO 9450, or when not in use. 2.3 CONNECT TO SOFTPHONE (PC) Connect a PC to the base 1. Plug the supplied USB cable into the port marked on the base. 2.

HBS-700 User Manual BLUETOOTH Stereo Headset

you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-700 (handset and headset must be paired). Voice dialing - Briefl y press the CALL button to activate Voice Command For best results, record the Voice dialing tag through your headset.

Congratulations on your sound investment.

ASTRO Gaming's A50 Wireless Headset offers a solution for the audio-savvy citizen who equally measures business and pleasure. Professionally-tuned Astro Audio paired with Dolby® 7.1 surround sound to pack aural one-two punch, while three unique EQ modes provide fully customizable transitions between media and gaming.

Wireless Headset System

To turn on the headset, slide the Power button on the bottom of the earcup to reveal green. On the top of the base there are three Audio buttons: computer, mobile, desk phone. These buttons allow you to switch to a different phone line/audio channel. Make a call 1 Tap an Audio button on the base.

Dragon speech recognition Guide Professional solution

Wireless headset user guide 1 Contents 2 Overview 3 Charging your headset 4 Wearing the headset 4 Powering on the headset 4 Connecting your headset for dictation 5 The adapter 5 Adjusting your computer's audio settings (Windows) 6 Indicator lights and alerts 6 Headset alerts 7 Adapter alerts 7

VXi BlueParrott S450-XT User Guide - Headset.com

Your S450-XT headset must be on and connected to your phone via Bluetooth. Making a Call 1. Dial the desired number on your phone. You will hear the call in the headset. 2. To end the call, press the MFB once. The call will end and the headset will enter Standby Mode. Answering a Call 1. When you receive a call, you will hear ring tones in the

BlueParrott B450-XT User Manual - B&H Photo

headset to reset, and the call will be sent back to the phone. When the headset is operating from the battery, all indicator lights and sounds will function as described in this guide When the headset is operating from power supplied via the USB cable, the headset including the audio indicators will function as described in this user guide

Pairing a Headset - Sonetics

Starting with your Flightcom Headset turned o˚, place the Flightcom Headset into pairing mode by pressing the Power and PTT buttons simultaneously until you hear Base Station registering , then release the Power and PTT buttons. B. The Base Station will automatically connect. The LED for that position will light continously.

Wireless Headset System - Headsets, Wireless Plantronics

3 To optimize the position of the headset, push the headset in so the microphone is close to your mouth. Behind-the-Head Assembly 1 Align the headband as shown. Ensure the headband sits flat against the headset, then rotate it up 90°. If you want to wear it on the left, switch the stem to the left side of the headband. 8

Logitech G933 Artemis Spectrum - Logitech: Wireless Mouse

Wireless On/Off G933 has two operation modes, Wireless On, and Wireless Off. Wireless On In Wireless On mode, most headset features are available,1 including custom sound profiles, RGB lighting, wireless, and audio mixing. When battery charge is low, lighting will dim and low battery notification tone will play. When battery

Wireless Headset System

4 While wearing your headset, press the call button on the headset. 5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do. NOTE For most phones, these factory default settings will sound the best.